TheCollector

Slowly but surly im getting al the bulbs replaced on my truck with leds I have done my 3rd break light reverse lights entire interior cab. now its time for the turn signals and brake lights, i got the bulbs however I am having trouble finding an LED safe/ compatable electronic flasher for my 1994. the original one is a 224 Wagner . I know i can get load resisters however I feel switching the flasher is an easier and better thing to do. does anyone know a part number or where to locate a flasher for our trucks that is led compatible? just need to do the front side markers and blinkers and my trucks full led!

Rusty but trusty

http://www.superbrightleds.com/cat/l...50--/20-519--/


On the side under "installation accessories" there is flashers, site must not know exact one for truck but maybe you could match one up, hope that helps. Maybe you could contact them?

TheCollector

first place i looked, the issue is I have no clue if the 2 they have would work. as far as i can tell the both would fit but the amp load is off from what i need. or at least compared to the wagner 224 i have in there currently.

Rusty but trusty

Well, LED's pretty much pull no amperage compared to regular bulbs, I think that is why you need one of those, I think with the stock flasher they will flash super fast due to the reduced load. I believe one from there will work. I have never purchased any of this stuff but I did research converting my old eldorado up until my wife got pregnant and the car got sold.

CPT150

i did, and ya, my LEDs were hyper flashing. I didnt want to cut and splice, so I changed out the Flasher. I think on my 08 the new flasher was TMI EL98-EP27...Yours should have 5 prongs and hopefully, that is the one that will work for you too. I got it from auto zone for like 12 dollars. It worked great