front wheel bearing/rotor removal
05-24-2007, 09:12 AM
#1
Member
Thread Starter
Join Date: Mar 2007
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
front wheel bearing/rotor removal
96 4x4 F150. Since ford deemed it needed to make it 135% more complicated than dana 35 TTB fronts, how the hell do you get the hub locks out?
My truck has Warn hubs on it, and I pulled the actuator face and c clip off, but the actual mechanism that engages the front wheels won't come off. All I want to do is tighten up the spindle nut.....lol
Oh, and how bad are the bushings on the control arms to replace?
My truck has Warn hubs on it, and I pulled the actuator face and c clip off, but the actual mechanism that engages the front wheels won't come off. All I want to do is tighten up the spindle nut.....lol
Oh, and how bad are the bushings on the control arms to replace?
05-24-2007, 06:26 PM
#2
Junior Member
Join Date: Feb 2007
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
There is an outside wire clip that also has to be removed.
Then take a couple of the long screws that hold the outside cover on and screw them into the locking hub and use them to wiggle it out.
Then take a couple of the long screws that hold the outside cover on and screw them into the locking hub and use them to wiggle it out.