TheCollector

How the hell to you get them little rivet like things off! i have tried drilling them out grinding them off ripping them out i cant torch them because the plastic will catch fire any suggestions? or the correct factory way to remove them! i need to prime my bumper for paint and they are in the way!.

DriveAk

I just used a sawzall to cut it off my bumper

TheCollector

I don't have one the only power tool i have is a drill

dewman

mini-hacksaw
http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

TheCollector

Facepalm I have one of them

65mechanic

Tool run!

th25

I stuck a prybar inbetween the valance n the bumper and pulle up till it yore off haha

TheCollector

i can rip it off in fact is alredy half off i want the little pin like things off so i will get a clean look and less hassle when i go to paint the thing.

65mechanic

The safest way I see is what you were doing. Take a drill and drill through them. Then take a punch and a hammer and knock through. Ill have to get up under mine to see whats up tomorrow and see if there's a better way.

f150cam

i used a little grinder and called it good.