markbitters

i have a 91 with a 302 and e4od and am planning on doing a maf conversion, what do i need to consider when choosing the correct ecm, and what years will work

Just call me Sean

iTrader: (1)

'94-'95 5.0 automatic equipped trucks.

happyhourhero56

is there a write up somewhere on it, i did a search and came up with wayy too many results, i figured my truck would be maf being it's a 95 but i don't see the sensor in the intake anywhere so i'm guessing it's map, i just don't know where the map sensor is located, if it is map i'd like to know if theres a writeup or what all is involved and an approximate cost

Just call me Sean

iTrader: (1)

If your truck has the 5.0 then it must be a stick. Only the '94-'95 5.0 automatics are MAF.

happyhourhero56

yeah it's a 5 speed what all is required to change it to maf, or could you point me in the direction of a writeup

Just call me Sean

iTrader: (1)

I don't know a good write up. If I were doing it I would pull the engine harness, the MAF sensor and ducting and the computer. Since yours is a '95 I would guess most or all the other sensors are the same.