You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Has anyone here replaced the door glass on your trucks, this is the second truck ive owned where the two front windows are all scratched up. So i am assuming most of these trucks get like that. I want to rplace the glass and the anti raddle strips as i think that is what has scratched them. does anyone know the easiest way or how to replace the door glass. i have done some other cars but there usually slanted and easy to get out these look so square i dont know how they would come out
As I remember, the track has to be loosened from the door to allow the glass to be removed. Its riveted into position, drill out the rivet, do the job and replace the rivet with a bolt and self locking nut.
Okay... That went better then expected. Fairly simple to do if anyone has specific questions i"d be glad to help.
Does anyone know anything about repairing or replacing the motor and gear assembly though... my window needs help when trying to roll back up.
It's got **** or wheels and you got problems...
Gear assembly/motor is fairly easy. You will notice when you take the door cover off (I have an 88' F150 XLT Lariat) that the motor is behind the small piece of door metal. It's help by 2 screws to the framing in the door. The motor holds in place on the track with a gear mechanism. Pull and remove/replace.