96f150351w

I'm replacing my rusted out core support for a new one and doing this my core support brackets are rusted out also. Got new ones from bronco graveyard but they don't mount up the same way the old ones do. Anyone on here change them out on here,did you bolt or weld them on or both and how since they don't mount up the same??!

Chris_1

iTrader: (1)

Could you maybe have ended up with the earlier version ? They changed the front of the frame in about 91 - 92 when they added crumple zones. I know the bumper mount brackets changed for sure.


You should have got some that look like the one in the picture ?
Checked LMC just cause I have it bookmarked - they show the same part for 80 to 96. If they sent you the right parts, you should be able to just grind off the rivets on the old ones and bolt on the new ones. Grade 8 bolts of course.

96f150351w

Don't think so, mine has the crumples but bronco grave yard says they fit 90-96 f150s

96f150351w

Mine weren't bolted or riveted on. I cut them off and I forgot all about lmc truck....

Chris_1

iTrader: (1)

Went outside (all the way to the driveway) to take a look at my 95. No rivets on that one. Just some short tack welds - 4 per flange. I guess they're not a major stress point.

96f150351w

Yea. I cut mine off already. But the way the bracket sits on the crumbled part of the frame is weird

Chris_1

iTrader: (1)

Try and get you a better pic tomorrow if I can.

96f150351w

That's the old one then the new one. Guess it just bolts up but kinda weird

Chris_1

iTrader: (1)

Seems to go right at the front edge of that bump.



Lousy picture, but maybe you can make it out. This one is welded all the way.

96f150351w

I can see it. The original ones are wider then the new ones