changing caster/camber bushings
#1
Seņor Member
Thread Starter
changing caster/camber bushings
Anyone able to offer any advice or know-how for changing the caster/camber bushings on a '94 4wd? The alignment shop wants around $25 per side to do them... if it's something I can do myself I'd as soon keep the $50 in my pocket Thanks!
#2
Pull the wheel off, take the bolt out of the upper part of the spindle that clamps around the camber bushing, tap the sid of the Ibeam with a hammer to loosen things up then use a cold chisel to pull the bushing out. This is pretty damn similar:
#6
Seņor Member
Thread Starter
so I don't have to remove the upper ball joint? also it looks like the bushing is composed of 2 nested pieces, an upper piece and a lower piece, do they both come out?
Trending Topics
#10
Seņor Member
Thread Starter
if I use a 2 jaw puller and try to grab the lip of the upper part of the bushing, you think the upper part will slide out of the lower part? or are they attached somewhere I can't see