brake booster line
#1
Senior Member
Thread Starter
brake booster line
so i plan on putting sea foam in my brake booster line tommorow but the only problem is, i dont know which one it is, its a 95 w/ a 302 thanks for the help
#2
No Pain, No Pain!
check out this post:
https://www.f150forum.com/f4/just-seafoamed-truck-7138/
You should be able to get an idea where it is from his video clip.
It should be a vacuum line running off the booster, which should be behind the master cylinder.
https://www.f150forum.com/f4/just-seafoamed-truck-7138/
You should be able to get an idea where it is from his video clip.
It should be a vacuum line running off the booster, which should be behind the master cylinder.
#3
Senior Member
Thread Starter
yeah i saw that, is there anyway somebody could post a picture and outline it for me? i just dont want to mess up my engine because i poured into the wrong spot
#6
08 February TOTM
Join Date: Nov 2006
Location: Dumfries, VA Member: #77
Posts: 3,184
Likes: 0
Received 19 Likes
on
7 Posts
One way you can verify this is to unplug the line it will have good suction on it.
I don't think I would test that by putting my finger over it
You can here the sucking on mine very well with the funnel stuck in the hose.
Remember to do this hot and to let it set for about 20 minutes after it's sucked in.
It may be a little hard to start at first, mine was anyways.
I don't think I would test that by putting my finger over it
You can here the sucking on mine very well with the funnel stuck in the hose.
Remember to do this hot and to let it set for about 20 minutes after it's sucked in.
It may be a little hard to start at first, mine was anyways.