Welder7018

Ok so ive been reading up on some of the other posts about 4x2 to 4x4 conversion kits and i wanted to know what are some websites i can buy one from or if i should just buy a 4x4 truck for a parts truck? I am extremely serios about this because i need a 4x4 to get around the farm.

MONSTERPRE

I hear ya brotha! 4X4 coming my way too!

conman365

Don't buy a kit... Everything is 100% bolt up, on the front end and on the transmission.
I know this, well because I did it.
You will need a 4wd front end,basically just the assembly. I used the original 2wd coils, brackets and even the tie rod steering.
For the transmission, you'll need a 4wd tranny, obviously, a transfer case, and a crossmember as the 2wd and 4wd are different, with the 4wd cm allowing space for the front driveshaft. If you have any questions, just shoot me a pm and I'd be glad to help you.

conman365

Here you go

http://oklahomacity.craigslist.org/pts/2132712671.html

Happy new year!

87F150Cobra

find a cheap 4x4 truck and swap over all the 4x4 stuff, you will be more ahead in the long run.

flareside_thunder

x2.....and what you don't use on the truck you could part out and recoup some of your money.

MONSTERPRE

x3....unless you want a SAS?(solid axle swap)...b/c a TTB wont work for as high as I am.

Ebay/Craigslist = magic

ford_tough_5L

x4 on the 4X4 parts truck.

Stinky

Insanity...sell your truck and buy a dif one. It will take you a month of Sundays to do it.

CRAZY

...and those Sundays of hard work and almost wanting to say "forget this sh*t" will make driving it when you are done that much more delightful because you know that you made that truck what you want it to be.
I say work it til the work is done.