300 inline 6 build
#1
300 inline 6 build
I have a 95 300 i6 2.5 in exhaust back to flowtech glass pack then ys out after it. K&nCold air intake injectors out of a mustang i think 19 lb egr delete msd street fire coil taylor distributor and rotar and taylor 8.2mm wires. And just regular spark plug. do i need to have my ecu reprogramed to get the most power out of it or will it be fine with the stock one?
#2
Hi-Rev Motorsports
stock is fine....
I'm running 2.5in exhaust NO muffler, MSD spark box, MSD coil and Taylor wires...K&N air filter and a Copper core plug and throttle response is 10Xs better than stock...
I also run E-Fans and a 160° T-Stat all emissions in place and a 5% fuel trim
I'm running 2.5in exhaust NO muffler, MSD spark box, MSD coil and Taylor wires...K&N air filter and a Copper core plug and throttle response is 10Xs better than stock...
I also run E-Fans and a 160° T-Stat all emissions in place and a 5% fuel trim