1995 xlt radiator core support rot issues
#1
Member
Thread Starter
Join Date: Mar 2008
Location: bordentown nj
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
1995 xlt radiator core support rot issues
as the topic says, am having serious rot at the mounting points of the rad. core support. how the heck do i replace one of these? i've found the replacement part thru lmc truck and have been scouring forums for 'how tos' on replacing it.
am also looking into media blastng the under carriage of my truck and then having it undercoated again. any suggestions regarding this process? am starting to get some flaking rust problems on my spring towers and want to keep the truck for at while longer.
any help is truly appreciated!
am also looking into media blastng the under carriage of my truck and then having it undercoated again. any suggestions regarding this process? am starting to get some flaking rust problems on my spring towers and want to keep the truck for at while longer.
any help is truly appreciated!
#5
Member
Thread Starter
Join Date: Mar 2008
Location: bordentown nj
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
i'm just looking for some pointers... as in where to start? what order to take stuff apart etc. never attempted something that serious before but can probably figure it out
https://www.f150forum.com/picture.ph...pictureid=7250
https://www.f150forum.com/picture.ph...pictureid=7250
Last edited by ironworker68; 05-04-2009 at 11:14 AM. Reason: jst showing off my baby.
Trending Topics
#8
We'd do it
iTrader: (1)
You don't have to remove the bumper, but you may have to remove both fenders. You might not have to if you have enough clearance to get the support out. Remove headlight assemblies, grille and body panel under those. Remove battery and battery tray. Remove radiator and evaporator (have the a/c system discharged). There's other small miscellaneous bracketry to remove. Remove support mount bolts and remove the support.
Just an FYI, my core support bolts aren't holding anything. The nose just kinda floats there.
Just an FYI, my core support bolts aren't holding anything. The nose just kinda floats there.
#9
You don't have to remove the bumper, but you may have to remove both fenders. You might not have to if you have enough clearance to get the support out. Remove headlight assemblies, grille and body panel under those. Remove battery and battery tray. Remove radiator and evaporator (have the a/c system discharged). There's other small miscellaneous bracketry to remove. Remove support mount bolts and remove the support.