Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

1995 switch on master cylinder

Thread Tools
 
Search this Thread
 
Old 01-18-2009, 12:09 AM
  #1  
Junior Member
Thread Starter
 
njabara's Avatar
 
Join Date: Jan 2009
Posts: 5
Likes: 0
Received 1 Like on 1 Post
Default 1995 switch on master cylinder

i have a 1995 f-150 that has a switch on the front top of the master cylinder that is leaking. i also have the ABS light on in the cab. i went to the part store and they could not identify the switch on top of the master cylinder.

Thanks for your help
The following users liked this post:
Athensboy12 (11-19-2021)
Old 01-18-2009, 01:13 PM
  #2  
We'd do it

iTrader: (1)
 
Just call me Sean's Avatar
 
Join Date: May 2008
Location: Orlando,Fl.
Posts: 35,602
Received 448 Likes on 402 Posts

Default

If you are speaking of an electrical switch then it's either the low fluid indicator or the one that indicates air in the lines. When there's air in the lines both the ABS and brake lights will come on. If you're speaking of the little valve connected to one brake line it's the proportioning valve.
Old 01-18-2009, 03:14 PM
  #3  
Junior Member
Thread Starter
 
njabara's Avatar
 
Join Date: Jan 2009
Posts: 5
Likes: 0
Received 1 Like on 1 Post
Default Picture

Picture
Attached Thumbnails 1995 switch on master cylinder-master-cylinder.jpg  
Old 01-18-2009, 04:34 PM
  #4  
Carbon Monoxide Commando
 
r moore's Avatar
 
Join Date: Dec 2008
Location: BILOXI MS.
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

take it to ford dealer, there is a recall on that switch,and it controls your cruise control cut out. ihave the same truck.
Old 01-18-2009, 04:49 PM
  #5  
Carbon Monoxide Commando
 
r moore's Avatar
 
Join Date: Dec 2008
Location: BILOXI MS.
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

go to my pics you will see a picture of that switch with new wiring w/blue tag on it installed by ford garage.by the way that particular re call was known to cause fires in engine compartment. good luck.
Old 01-18-2009, 06:30 PM
  #6  
We'd do it

iTrader: (1)
 
Just call me Sean's Avatar
 
Join Date: May 2008
Location: Orlando,Fl.
Posts: 35,602
Received 448 Likes on 402 Posts

Default

I don't know what that one is, so r moore is probably right.
Old 01-18-2009, 06:36 PM
  #7  
90 f150 inline 6
 
cjwat24's Avatar
 
Join Date: Jan 2009
Location: virginia beach,va
Posts: 84
Likes: 0
Received 1 Like on 1 Post
Default

yes he is right i owned a e150 which had the same thing and it did set on fire kinda sucked. I had to buy the part cost me about $30 and i would do this asap
Old 01-19-2009, 02:54 AM
  #8  
Senior Member
 
mitchalvin's Avatar
 
Join Date: Jan 2008
Location: Pablo MT
Posts: 1,254
Likes: 0
Received 1 Like on 1 Post

Default

At the very least unplug the wire asap. The antilock brakes have different sensors and do not use that sensor, with it leaking that might cause problems with the computer because of the slight fluid and pressure loss the switch is seeing.
Old 07-15-2012, 03:05 PM
  #9  
Member
 
jgrathoff's Avatar
 
Join Date: May 2010
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

wow thats nice to know about the recall looking at my truck with the switch it already has the blue paper on it and is leaking, does anyone know if Carquest would carry that low fluid indicator?
Old 01-11-2023, 07:01 PM
  #10  
Mr. Fixit
 
RacerX69's Avatar
 
Join Date: Mar 2019
Location: The Great Pacific Northwet
Posts: 99
Received 37 Likes on 21 Posts
Default

So I’m in a similar situation.

Same year, Eddie Bauer, 5.8, E40D, 4x4.

Noticed brake fluid leaking around this switch. Wiped the fluid off to see just where the fluid was coming from, discovered the crimped on part of the switch was loose, and turned it with my fingers.

Fired it up to go for a check ride and see the brake and abs lights are on.

Parts store couldn’t find a part listed, then one of the kids at the parts store found something at another F150 forum.

Mororcraft SW-6350 switch kit. Looks like an updated switch (more robust), a pigtail adapter, and a zip tie.




Quick Reply: 1995 switch on master cylinder



All times are GMT -4. The time now is 10:52 PM.