njchapin

I have a 95 f150, straight six, five speed and am looking for the 0 degree TDC mark. I have notches on the left side of the cam pulley, one of which is a larger triangle which I'm thinking is 0 degrees. But I also Have numbers, 12 10 8 and 6 on the right side of the cam pulley. Which and where is O degrees TDC. I know its 10 +/- 2 degrees, just need to know where 0 is. Thanks in advance

Just call me Sean

iTrader: (1)

Wipe the grease and oil off of the bracket and you should be able to read it.

njchapin

You must not have understood. I have two sets of marks. when looking at the engine there are notches on the left side of the cam pulley, and one of the notches is a larger triangle notch.(Is this O TDC?) Looking down at the right side of the cam pulley there are actual marks w/ #'s(12, 10, 8, 6). All I want to know is where is 0 TDC. Is it the larger triangle notch on the left side of the cam pulley? No grease or oil on the marks, all visible

Just call me Sean

iTrader: (1)

If the marks are all visible, then you should be able to see the 0 degree mark. On my truck, timing is set at 10 degrees BTDC and the deep notch is 10 degrees BTDC, but mine is an '87.

homernukem

Read this
http://www.ford-trucks.com/forums/10...-6-timing.html