flareside_thunder

The motors are all the same throughout the Gen8/9 periods...

Spikebrian

Got the problem fixed thanks for the input anyways, the only reason I was asking was because the
broncograveyard website shows there's 2 different styles built from gen 8/9, but apparently not lol.

Aaron

Found this on another forum... just as described above.
http://www.nloc.net/vbforum/how-arti...-slippage.html

I made the fix to my drivers side window motor tonight. Nothing like a free fix (I already had some nuts laying around)!!!

Spikebrian

ya I posted some pictures of me doin the same thing on a different thread, basically the same thing

https://www.f150forum.com/f10/power-window-motor-65341/

rustynails606

I just put the kits in both windows just make sure the kit is for your motor the round motor uses a gear thats 1/4 inch larger than the 1992 and above!!

bigvon

it works it works it works by god it works. it took me about 30 min per door you do have to use the right screws because i had to use smaller. thanks so much i almost brought new motors.

Junkyardjeff

You dont have to remove the window regulator from the door to remove the motor,there are three dimples in the door where you drill about a 1/2 hole in each dimple and use a 1/4 drive socket (5/16 or 8mm) and extension to get at each bolt holding the motor to the regulator.

brucebanner77

any video of how to do this, i have to fix my passenger window. it makes no sound at when using either switch

Warlockk

If you get no sound I would check for voltage first. Usually the motors keep working but the gears fail. Check the fuse for power. Then pull the switch and check for 12v. If you have power there jump the switch and check for voltage at the motor connections. If you get power and ground then you need to replace the motor. By the time you get this far it will likely be self evident how to drill the access holes if you need to.

Redcan25

I am having trouble getting my passage side window to work on my F150 1989 XLT Lariat I have replaced motors and switches and the driver side works find but the passage side want work right.It will go up but not down it work find from the drivers side but not from the passage side.Please help I don't know what to try next.And the wiring seem to be getting hot on the passage side.